Specifications – Toshiba KV-7168A User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Power suppiy
120V AC, 60 Hz
Power consumption
1QVJ
External dimensions
17
X
3-5/8
X
12-1/2 inch (Wx H
X
D), 430 x 92
x
318 mm (W x H x D)
Weight
11 ibs (5.0 kg)
Signai system
Standard NTSC color teievision system
Recording System
Rotary 2-head azimuth
Cassette
VHS marked, 1/2 inch cassette tape
Tape speed
A2-hourmode: 33.35mm/s, A6-hour mode: 11.12mm/s
Recording/ptayback time mode
A2/A6/A12/A1S/A24/24./48/72/120/168 hours (when T-120 is used)
Fast forward/rewind time
Within 2 minutes (when T-120 is used)
Video input (BNC)
1 .OV(p-p), 75 Unbalanced Luminance signai
Video output (BNC)
I.OV(p-p), 75
il
Unbalanced Luminance signai
Horizontal resoiution
350 iines (monochrome mode), 300 lines (color mode) (A2-hour mode)
Video S/N
More than 45 dB (A2-hour mode): monochrome mode
More than 43 dB (A2-hour mode): color mode
Audio input
Line input; 308mV (rms), more than 47k
Q,
pin jack
Microphone Input: 0.245mV (rms), less than 5k Q, o3.5 jack
Audio output
388mV (rms), less than 4.7k
Q,
pin jack
No. of audio tracks
1 track
Audio frequency characteristics
100 Hz to 10 kHz (A2-hour mode)
Audio S/N
More than 43 dB (A2-hour mode)
Operating conditions
Temperature: 4rF to 104"F (5"C to 40"C)
Humidity: less than 80%
Storage conditions
-4"F to 140"F (-20"C to 60"C)
Connector section
Alarm input
Ground input: 0 to 0.5V
Aiarm reset input
Ground input: 0 to 0.5V
Aiarm output
DC 5V, impedance: 220
il,
less than 10mA
Recording trigger output
During time lapse: 0/5V negative pulse signal (pulse v/idth: 33ms)
A2 and A6-hour mode: OV
Alarm recording: 0/5V (Programmable)
Except above-mentioned: 5V
Tape end output
Open/Short, impedance: 220
LI,
less than 20mA
One shot input
Ground input: Oto 0.5V
Design and specifications are subject to change without notice.
Accessories
instruction manual
(1)
Warranty card
(1)
Dew caution sheet
(1)
u
t
50