Toshiba KV-7168A - Manual (Page 33)

Press the > SHIFT button to make INTERVAL blink.
Press the + SET button to set the time interval be­
tween the individual recording fields.
DISPWV
SE-
aii-T ■ TRACKINO
cb a ^CD
5ELFC"
S E T tJ P
ALARM REC TIME 15S
SPEED A ZH
ISHOT REC FIELD IF
INTERVAL [O.ZSi
RES“ART REC OEF
TAPE END MODE ETOP
ALARM STOP
MENU-[D1SPI.AY]
Each time pressing the + SET button, the display changes
as follows.
0.2s -> 0.5s ^ 1 .Os -> 2.0s
Each time pressing the - SET button, the display changes
in the reverse order.
Display Time interval
0.2s 1 field per 0.2 seconds
0.5s 1 field per 0.5 seconds
1.0s 1 field per 1.0 seconds
2.0s 1 field per 2.0 seconds
Press the DISPLAY
button twice to erase the
display.
DISPLAY VI'MEK>DDEA
¥ CD 5itT ^3
< SHFT >
O CD VC3
LOCATION SELEC"
Press the REC button.
8/28/95 WED
17:30:0? LOl
8 Input from the remote control switch.
q
?
Remote control switch
To release the One-shot Recording mode
Press the v or a TIME MODE button to change the time display on the VCR display to a display other than LOl, L02 and LOS.
Note:
One-shot input is not accepted during recording pause.
33