Search operation, Notes – Toshiba KV-7168A User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

With the alarm search function, it is possible to search for
alarm that has been recorded on the tape.
Search Operation
Press the STOP button.
--PLAY «STOP
1'^
_____ |
a
„
ahm
I
■'
^ , n n n -
l-l P
► t / U U
t I
Press the COUNTER MEMORY button twice to make
‘ ALARM M" to light.
[CÜI
H
Í
n
n
n
^
/-/
r J u u * *
t
I------- COUNTER---------- 1
o CD CD
yimy ALARM RESET
Turn the
SHUTTLE dial to set rewind or fast forward.
|(31
rpLAVj
n n
n
n !-!
H
3
1 1
u t U *
Í 1
When the tape reaches the
alarm recorded position, The
VCR automatically enters the
still picture mode.
Press the
PLAY button.
■ ► PLAy «STOP
tMpm
Notes: --------------------------------------------------------------------------------------------------------------------------------------------------
In the cases shown below, Alarm Memory search may be not carried out.
■
If the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped.
■
If the alarm recording interval is not (eft for more than those fisted in the following
chart
then, the alarm may be skipped.
■ If there is not enough time between the beginning of the alarm search and the tirst alarm activation. If the time period is shorter
than those listed in the following chart then, the first alarm may be skipped.
Record
mode
Milnimum alarm recording
time needed
Minimum alarm recording
interval needed
Minimum recording time needed between
start of search and first alarm activations
A2 or A6
2 s
7s
5
S
A12
15s
50 s
35 s
A18
7s
25 s
15s
A24
30 s
95 s
65 s
43