Connecting the alarm terminals, Note – Toshiba KV-7168A User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

....

r.;.: i..-.j.-..:...o.-...;:^:.k..:-;....:..,....:.........

Connecting the Alarm Terminals

Connecting the ALARM IN/OUT terminals

► When the alarm switch is ON, alarm recording starts. 11 is possible to confirm the warning from outside by connecting the

switching input of external interface devices such as alarm lamp or alarm buzzer to the alarm output. Please do not use the

alarm output for power source to any of external devices.

Connecting alarm reset input

' When the alarm switch is ON, alarm recording starts. However, when a closure is applied across the ALARM RESET and

GND terminals, the alarm record condition resets and the VCR returns to the original record mode it was in before the alarm

condition occurred.

Note:

When simuHaneously connecting alarm input and alarm reset input, be sure to carefully check the voltage levels.