Toshiba MA-215-10 SERIES - Manual (Page 53)

Paper Cover
Fig. 1
Fig. 2
Fig. 5
Ink Roll
REFL&CING THE INK ROU.
When the receipt and journal print
becomes too light to read, replace the
Ink Roll in the following manner.
1. Turn the Mode Lock to the "OFF”
position.
2. Remove the Paper Cover. (Fig.l)
3. Hold the Ink Roll Knob and pull it
upward. The Ink Roll will be
removed, (Fig.2)
A, Insert a new Ink Roll into the space
between the Ink Roll Holder and the
Frame. (Fig.3)
5. When replacement is completed, attach
the Paper Cover (Fig.4) and turn the
Mode Lock to the "REG" position,
* The Ink Roll is a comsumable product
and a genrine part supplied by TEC.
Ask your TEC representative for an
additional order. (Fig.5)
REPLENISHING INK TO THE STORE MESSAGE
STAMP
When the store message is printed too
lightly, replenish ink in the following
manner.
1. Turn the Mode Lock to the "OFF”
position.
2. Open the Paper Cover. (Fig. 1)
3. Hold the both sides of the stamp unit
with your fingers and remove it by
pulling it upward, (Fig.6)
4. Apply ink to the replenishment pad
at the back of the stamp unit. The
amount of refilling should be
adjusted according to the density of
the printed message. (The supplied
ink bottle contains 5cc of ink.)
(Fig.7)
5. When replenishing of ink is
completed, attach the Paper Cover
(Fig.4) and turn the Mode Lock to the
"REG" position.
Fig. 6
Stamp Unit
Fig. 7
Ink Bottle
Stamp Pad
-49-