Toshiba MA-215-10 SERIES - Manual (Page 47)

HOURLY RANGE SETTING
A maximum of 24 hourly ranges may be set. By setting hourly ranges,
the sales data are processed into each hourly range memory which will
be read on Auto X and Z reports.
CONDITION: After Auto Reset
OPERATION: Mode Lock: SET
I
7 t@/FOR]-> [HOUR
Repeat (max. 24 hourly ranges)
MINUTE] [#/NS] [AT/TL]
Enter the time that ends each
hourly range, in the 24-hour
system. (0 ~ 2359)
NOTES: 1. To change the hourly range table once set, partially or
entirely, do the entire setting operation over again.
2. To reset the hourly range table and not to provide any hourly
ranges, operate in the "SET" mode:
7 [@/F0R]—0 [#/NS]—[AT/TL]
3. Do not set an hourly range accross 24:00, such as "from 23:00
to 1:00". If ever set, no data will be processed into that
hourly range.
SAMPLE OPERATION:
To set the following hourly range table:
Table
up to 8 00
8 00 — 9 00
9 00 - 10 00
10 .00 13 00
13 .00 16 00
16 00 - 18 00
Key Operation
Mode Lock: SET
Enter 7, depress [@/F0R].
Enter 800, depress [#/NS].
Enter 900, depress [#/NS].
Enter 1000, depress [#/NS]
Enter 1300, depress [#/NS]
Enter 1600, depress [#/NSl
Enter 1800, depress [#/NS]
Depress [AT/TL] to end.
Thank you
Call again
0 2 - i a - 8 7
g l 2 5 4 5 6
# - a ?
0 8 - 0 0
0 9 - 0 0
1 0
-
0 0
1 3 - 0 0
1 6 - 0 0
1 8 - 0 0
o d - o o a s
1 0 - 0 1
-43-