Toshiba MA-215-10 SERIES - Manual (Page 37)

CONDITION : After Auto Reset and GT Reset
OPERTATION : Mode Lock: SET
DEPARTMENT TAX STATUS SETTING
(to set Itemized Dept, Status)
3 [@/F0R]-T^[TXl/M]^tTX2/M]----- ---------------- »[DEPT]--- --------
(to set Single-item Dept, Status)
-»[AT/TL]
NOTE: 1. After RAM clear, the department will be automatically
programmed as Itemized Department.
2. Each department results in anerror if its memory is not opened,
3. When 0 is entered, followed by [DEPT] key, all the status
will be reset, Even if the status is reset, the listing
capacity and preset price of the department will not be reset.
4. When the [TXl/M] or [TX2/M] key is pressed, the status of the
department will be inverted.
That is, when the Tax Modifier key is pressed, the status will
change from non-taxable DEPT to taxable, or taxable to
non-taxable.
Each department status is read by the number indicated in the AMOUNT
portion of the display when each department key is depressed in the above
operation.
The numbers and their respective statuses are:
0: Non-taxable
1: Only Tax 1 taxable
2: Only Tax 2 taxable
3: Tax 1 and Tax 2 both taxable
Watching the number, adjust the status
See the examples below:
by depressing these keys
NUMBER KEY-IN FOR CHANGE NEW NUMBER AND
CHANGE PRIOR TO [DEPT] KEY STATUS OBTAINED
0 + [TXl/M] « KTaxl only)
0 [TXl/M] [TX2/M] 3(Taxl & Tax2)
0 -> [TX2/M] * 2(Tax2 only)
1 -> [TXl/M] * 0(Non- taxable)
1 [TX2/M] 3(Taxi & Tax2)
1 [TXl/M] [TX2/M] •* 2(Tax2 only)
2 •* [TXl/M] 3(Taxl & Tax2)
2 [TX2/M]' + 0(Non- taxable)
2 •* [TXl/M] [TX2/M] KTaxl only)
3 ■r [TXl/M] 2(Tax2 only)
3 [TX2/M] * KTaxl only)
3 [TXl/M] [TX2/M] •¥ 0(Non- taxable)
-33-