Listing capacity open key ([lc open]), Pr-and-lc open key ([open]), Non-add number print key ([#]) – Toshiba TEC MA-1040-100 Series User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PR
OPEN
PRESET OPEN KEY ([PR OPEN])
This key is used to modify the status of preset department keys. When
the [PR OPEN] key is depressed prior to depressing a preset department
key (either before or after the numeric entry), the preset department
key is reversed to non-preset (i.e. open) and allows amount entry
through the numeric keyboard.
If a preset department is entered with a price through the numeric
keyboard using the [PR OPEN] key in the manner just mentioned, no
repeat operation for the same price entry is then possible for that
department key.
The [PR OPEN] key can not be used with the [PLU] key.
LC
OPEN
LISTING CAPACITY OPEN KEY ([LC OPEN])
This key is used to release the listing capacity pre-programmed on
each Department (or on each open PLU linked to the department
accordingly). To operate, depress the [LC OPEN] key before depressing
the department key (either before or after the amount entry), or any
time before the [AMT] key in an open PLU entry sequence.
By depressing the [LC OPEN] key, the HALC (High Amount Listing
Capacity) of the department will be released to allow a numeric entry
with two further digits.
In order to allow an amount entry exceeding the value defined above,
the Mode Lock must be turned to the 'MGR' position by the store
manager.
Repeat operation will be possible on a department or an open PLU even
when the [LC OPEN] key is depressed for the item entry.
OPEN
PR-AND-LC OPEN KEY ([OPEN])
This is a dual-function key that has both [LC OPEN] and [PR OPEN] key
functions.
NON-ADD NUMBER PRINT KEY ([#])
When the Mode Lock is in the REG, MGR, or position, this key is
used to print a non-adding number (such as Customer No., Check No.,
Credit Card No., etc.) on the receipt and journal for future
reference.
To operate, enter a maximum of 8-digit number and then depress this
key. The number is then printed. This operation may be performed
any time between items, before or after all the sale items (if
operated before finalizing the sale).
- 9 -