Message descriptors (tri-mark lamps) – Toshiba TEC MA-1040-100 Series User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/671553/4/background.png)
NUMERIC DISPLAY
AMOUNT (8 digits):
DPT (2 digits):
RPT (1 digit):
Displays the numeric data, such as amount, quantity,
etc.
Displays the code which represents each Department
key. It stays lit when repeating the same department
entry.
Displays the repeat count of the same item. The count
is indicated from the second entry on, and only the
first digit will be displayed even if the count
exceeds nine.)
PLU (3 digits; the DPT and RPT digits are commonly used for this purpose.):
Displays the PLU code when any PLU is entered. It
goes out when repeating the same PLU entry.
MESSAGE DESCRIPTORS (TRI-MARK LAMPS)
SLP:
ALM:
REG:
(-):
TXBL:
ST:
TL:
CG:
Lights up when a slip
has properly been
inserted to allow
validation. It flickers to require a slip insertion when validation
compulsion is programmed on the transaction key just operated.
Lights up with the alarm buzzer to indicate that the last operation
or numeric entry has
resulted in an error.
To clear the error
condition, depress the [C] key.
Lights up when a sale item has been entered.
Lights up when the [RTN MDSE], [DOLL DISC], [%-], or [ITEM CORR] key
has been operated.
It also lights up when the
[ST], [TXBL TL], or
one of the total keys
has been depressed and the
displayed amount is
negative.
It lights up also when an amount is entered in the
" mode.
Lights up when a taxable item has been entered. It also lights up
when the [TXBL TL] key is depressed, indicating that the amount
displayed is the sale total plus taxes due (in which case the "ST"
lamp also lights up). This "taxable total display" function is also
applied when the [ST] key is depressed if the option "Taxable Total
Display on [ST] Key Depression" is selected.
Lights up when the subtotal amount is displayed after the [ST] key
has been depressed.
Lights up on a finalizing operation with the total amount displayed
when a sale is finalized without any amount tendered.
When an amount tendering operation has been performed, this lamp
lights up with the change due displayed.
SHORT: Lights up when the amount tendered is less than the sale total with
the shortage amount displayed.
- 4 -