Enforced clear of hold condition – Toshiba TEC MA-1900 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOI-11006
ENFORCED CLEAR OF HOLD CONDITION
(on Individual Terminals)
This can be operated when the HOLD condition on a terminal by no means be cleared because
the terminal cannot receive a Clear Command from the Master Terminal for some reason (the
Master Terminal becomes down, etc.)-
OPERATION ON ANY TERMINAL IN HOLD CONDITION: (Mode Lock: X or Z / GT Lock:
Neutral)
9999 [AT/TL]
DESCRIPTION:
On this operation, the HOLD condition is cleared, issuing again all the reset reports that have
already been taken as Manual Resets (with the Consecutive Nos identical to those already
issued as Manual Resets) and allowing any key-in operations. However, this operation is
regarded as an emergent measure to cope with such a trouble as the Master Terminal
becomes down, etc. and thus no other solutions can be chosen, because the sales data
memory of those reports can no longer be collected by the Master Terminal.
- 3 0 -