In-line report print format – Toshiba TEC MA-1900 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EOl-11006
IN-LINE REPORT PRINT FORMAT
The print format of each report is basically the same as the format of the corresponding
stand-alone terminal report except that some indications are additionally printed as in-line
operation job IDs.
MASTER TERMINAL (In-line Reports)
Print Format
^
* lit 4c
4c
^
RTR Job Symbol, & Separator between Individual
Terminal Report Data
Consolidated Data Report Indication. {..
Report ID No. such as X03, GTX03, etc.)
Process Report Indication (<
such as X03, GTX03, etc.)
= Report ID No.
#1 dddddd
A
dddd
Subtitle of ABC Analysis Reports (Report Title X21 or
GTX21)
Designated or Link Department Name
Designated Data ID No.
#1
#2
#3
#4
Best in Quantity
Best in Amount
Worst in Quantity
Worst in Amount
JOURNAL INDICATIONS ON INDIVIDUAL TERMINALS
(when report data is collected)
X03
A
Z03H
Z03H
15:40TM *
A
Read Report Collection Indication
Time of data collection
Report ID No. (X is replaced by Z on reset reports. “GT" is added on
GT reports. The No. is always printed in 2 digits. For example for Day-
of-Week GT Read, "GTX16^ is printed.)
15:40TM *
15:40TM =
Reset Report Collection Indication
Time of Clear Command receiving
“H" is printed in case of a HOLD RESET type.
- 21 -