M using the pedals with layer mode, Metronome, Adjusting the relative volume – KORG Concert Korg Digital Piano C-150 User Manual
Page 12: Tempo, Using the built-in metronome
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Playing
Selecting the Function of the Left Pedal
(C-150 only)
To change the pedaTs function, hold down the
[TRANSPOSE/FUNCTION]
switch
and
step
down on the pedal.
TRANSPOSE
H—n
The function switches between "soft" and "soste
nuto" each time you do this.
Note: no special indication is provided to show the pedal's
current function. If necessary, try switching the
function back and forth and comparing the differ
ence in the sound produced by using the pedal.
Note; This setting remains in memory even after the power
has been switched off.
M
Using the Pedals with LAYER Mode
in the LAYER mode, the pedals may be used with
just one voice or with both. To change between three
possible pedal settings:
D
Hold
down
the
[TRANSPOSE/FUNCTiONJ
switch.
Press the damper pedal.
Depress !he
damper pedal.
C-150
Note: The changes will cycle with each press of the pedal,
(See illustration.)
/
One
Voice
Other
Voice
Both
Note; The LED indicators in the [VOICE selector] switches
light to indicate the voice or voices that use the ped
als.
Note: The individual pedal settings for the LAYER mode
remain in effect through all subsequent mode
changes until you turn off the instrument. When the
instrument is turned on, the pedals always start with
the BOTH setting for the LAYER mode.
1 2
I
5. Using the Built-In Metronome
The instrument has a built-in metronome. It is capable
of accenting particular beats, or groups of beats. This
feature allows the metronome to keep time in differ
ent meters.
Note: The metronome sounds through the built-in speak
ers and headphones.
METRONOME
Pressing this switch alternately starts and stops
the metronome.
I I I ’ I t ! 1
Adjusting the relative volume
Press and release the [METRONOME] switch to
start the metronome.
To make the metronome louder, hold down the
[METRONOME] switch and press the [RECORD]
switch repeatedly.
To make the metronome softer, hold down the
[METRONOME] switch and press the [START/
STOP] switch repeatedly.
i i I I ' i 1 I t
METRONOME START/STOP RECORD
softer louder
TEMPO
Use the [TEMPO] control slider to adjust the
tempo.
The available range is ;=40"200.
Note; The [TEMPO] control slider also adjusts the RE-;
CORDER tempo.