KORG Concert Korg Digital Piano C-150 - Manual (Page 10)

Playing
1. Select the voice
Press a [VOICE SELECTOR] to choose the voice.
PfANO E.PIANO HARPSi VISES ORGAN STRINGS
ogaaaaE
PIANO Bright acoustic grand piano.
E.PIANO Synthesized electric piano.
HARPSI Traditional harpsichord.
VIBES Jazz vibraphone.
ORGAN Pipe organ sound.
STRINGS String section.
Sounds processed with INFINITY oo
¡NRNiTY
By using LAYER mode, you can set the piano to play
two voices at once. In LAYER mode, the piano plays
both voices over the entire range of the keyboard.
2. Selecting Voice Modes
The piano offers two voice modes: SINGLE and
LAYER.
SINGLE This, the normal performance mode, uses one
sound over the entire range of the keyboard.
LAYER This mode simultaneously uses two voices over
the entire range of the keyboard.
Note: The LED indicators in the switches light to indicate
which voice or voices are currently in use.
SINGLE
B Press a [VOICE SELECTOR] and every note
across the range of the keyboard will sound the
selected voice (for example, PIANO).
LAYER
Hold down one [VOICE SELECTOR] and press
another and every note over the range of the key­
board will sound both selected voices (for ex­
ample, PIANO and STRINGS).
Since the LAYER mode uses two voices , a maxi­
mum of 16 notes (or 10, if the PIANO voice is se­
lected), instead of the normal 32, can be played at a
given time.
Adjusting the relative volume
Since the LAYER mode both use two voices, you may
wish to adjust the relative loudness of the voice:
Q Switch to the LAYER mode, if not already there.
B Hoid down the [VOICE SELECTOR] corre­
sponding to the voice that you wish to make
softer.
Make the other voice louder by pressing the cor­
responding [VOICE SELECTOR] as often as nec­
essary to achieve the desired balance.
Example: When Selecting PIANO and STRINGS.
PIANO E.RIANO HARPSI VIBES ORGAN
'J''
](“^1 31:
”0
'^While repeatedly pressing this Hold down this switch to make
switch to make this voice louder, this voice softer.
Note: Any changes that you make affect only the current
voice. The new volume balance settings remain in
effect through all subsequent voice changes until
you change them. Even after turning the unit off,
the volume balance settings in memory,
3. Add various effects (C-350 only)
Setting the Brilliance
To set the brilliance, hold down the [BRIL­
LIANCE] switch and press [PIANO], [E. PI­
ANO], or [HARPSI] switch.
BRItUANCE E,PIANO HARPSI
■ MEllOW — NORMAL------ BRIGHT
PIANO MELLOW
E.PIANO NORMAL
HARPSI BRIGHT
You can check the current setting simply by hold­
ing down the [BRILLIANCE] switch. The lamp cor­
responding to the current setting (the lamp on the
[PIANO], [E. PIANO] or [HARPSi] switch) lights up
while the switch is held down.
PIANO E.PIANO HARPSI VIBES ORGAN
.....D" joil
:I ^ illi
“■■■
d i: —IT
To Cancel the LAYER mode, simply select a differ­
ent voice.
10