Toshiba TEC MA-230 - Manual (Page 19)

Chg
OPEN
CHARGE TOTAL KEY [Chg]
This key is usually programmed as "Charge Sale Total" Key. However,
it may be programmed to be the key for other non-cash media such as
payments in credit cards. Thus this key is used as an alternative
method of payments for media other than cash and check. To operate,
depress the [Chg] key, instead of [AT/TL], to obtain the total and
finalize the sale.
This key has exactly the same functions and programmabilities as the
[CHK] key except that the [Chg] key is usually programmed as a "TOTAL"
key but not a "TENDER" key.
This key may also finalize received-on-account payments if not
prohibited in the system option.
The [Chg] key is also used to finalize the current sale of charge
posting. In this case, the amount displayed by the [Chg] key is the
sale total including the previous balance.
LC-AHD-PRESET OPEN KEY [OPEN]
This key is a dual-function key that has both [LC OPEN] (page 9 ) and
[PR OPEN] (page 9) key functions.
R E C E I P T
ISSUE
RECEIPT POST-ISSUE KEY ... [RECEIPT ISSUE]
This key is used to issue the receipt of a sale when the sale has
already been finalized with the [RECEIPT ON/OFF] switch positioned to
OFF. However, the post-receipt can be issued even when the [RECEIPT
ON/OFF] switch is positioned to ON if so programmed in the system
option.
To operate, depress the [RECEIPT ISSUE] key without a numeric entry.
The receipt for the last sale is then issued, with the sale total only
printed. This key will not function if another sale has already been
under way.
#/NS
NON-ADD NUMBER PRINT / NO-SALE KEY
This is a dual-function key that has both [#] (page 10) and [NS] (page
6) key functions. If depressed with a prior number entry, it will
function as the Non-add Number Print key.
If depressed without a prior numeric entry when the register is
outside a sale, it will function as No-sale key.
The [#/NS] key always functions as [#] key in the X or SET mode.