Toshiba TEC MA-230 - Manual (Page 12)

RF
RECEIPT FEED KEY [RF]
JF
This key is used to advance the receipt roll. It is operated by
depressing the key and holding it in that position until the paper has
advance to the required position.
The receipt roll can be advanced even when the [RECEIPT ON/OFF] switch
is in the OFF position. Receipt feeding even during a sale is
allowed.
JOURNAL FEED KEY [JF]
This key is used to advance the journal roll in the same fashion as
the RF key. This key is useful if the cashier, due perhaps to an
interruption whilst ringing up a sale, is unsure which items have
already been entered. By using this key, the cashier can see which
figures have actually been printed.
The RF and JF keys can not be operated simultaneously.
CLEAR KEY C]
This key is used to correct a numeric entry error or a declaration key
(such as [RTN MDSE]) entry error if prior to depressing any other
function key, or to correct any error condition and cancel the alarm
buzzer.
If the [C] key is depressed after a subtotal is obtained, the subtotal
is then displayed.
TX/M
TXl/M
TXl/M
(for single-tax area) ... [TX/M]
TX2/M (for dual-tax area) ... [TXI/M], [TX2/M]
TX2/M TX3/M (for triple-tax area) ... [TXl/M], [TX2/M], [TX3/ m ]
TAX MODIFIER KEYS
Each of these keys is used to reverse the taxable/non-taxable status
on departments, PLUs, or other tax-programmable keys for one entry
only, Each of these key will function independently with its own tax
table pre-programmed for taxable items from the others.
The tax modifier key(s) will be effective to reverse the tax status
programmed on Departments, PLUs, [DOLL DISC], [%+], and [ % - ] keys.
To operate, depress the required tax modifier key prior to depressing
any of these function keys above listed, i.e., either before or after
the amount entry.