Tuner operations, Important, Manual tuning – JVC SP-PWC60 User Manual
Page 39: On the remote control, 1 press fm/am repeatedly to select the band, On the center unit, Press fm/am repeatedly to select the band
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
1 Set the remote control mode selector to
AUDIO,
2 Press FM/AM.
AUDI01-
J ^ I M A M
Manual tuning
The buttons described below are used on pages 36 and 37.
On the remote control:
1
Press FM/AM repeatedly to select the
band.
Example:
When the system is tuned in to 810 kHz.
8
1
0
,
2
Press TUNING repeatedly until
you find the frequency you want.
when you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
On the center unit:
1
Press SOURCE repeatedly to select the
band (FMorAM).
2 Press TUNING +/- repeatedly until you
find the frequency you want.
NOTE____________________
• When an FM stereo program is received, the ST indicator lights on
the display window.
36