JVC SP-PWC60 - Manual (Page 35)

Advanced operations See page 23 for button locations.
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by ДД!|
specifying the beginning (point A) and
ending (point B).
■ During playback
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor ►/◄to highlight
cd qp > .
3 Press ENTER.
TIME ¿О ПНР ©.f СНАК^ С® 1.'8 01i' 3 Si 1..Т
4 Press Cursor ▼ /
А
repeatedly to select
"A-B".
5 Press ENTER at the beginning of the
part you want to repeat (point A).
Ш
TIME O A- ©i* CHA.3 i^ OS 1 . - 8 E3 1 / 3 Sa 1 / 1
The repeat mode indicator “Cf- A — ” appears on the display
window.
6 Press ENTER at the end of the part you
want to repeat (point B).
The repeat mode indicator on the display window changes to
A — B ” and A-B Repeat Playback starts.
7 Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE____________________
« When playing back a DVD VIDEO, A-B Repeat Playback is possible
only within the same title.
« When pkiTTng back a VCD, SVCD, or CD, A-B Repeat Playback is
possible only within the same track.
• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC tunction.
Tray lock
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
WTiile the system is turned off
]C Ф [C
DISC 1
Press and hold
• “LOCKED” appears on the display window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
• “UNLOCKED” appears on the display window.
Sound and other settings
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
NOTE
• Before you start operation; There is a time limit when
doing the following steps. If the setting is canceled before you finish,
start from step 1 again.
7 Press SETTING.
Example:
В A L . C N T R
2 Press Cursor T / A to select the item
you want to set.
. BAL. (Balance);
You can adjust the balance of the sound between “R (right) -
21” and “L (left) -21”. To set the balance to normal, select
“CNTR (center)”.
. MON. (Monitor Out):
Select the video output jack type by which you watch DVD
playback after connecting your TV. (See page 12.) Set the
video output to use AV COMPU LINK remote control
system. (See page 38.)
VIDEO: To watch DVD playback via the VIDEO jack.
S: To watch DVD playback via the S-VIDEO jack.
COMP (Component):
To watch DVD playback via the COMPONENT
VIDEO OUT jacks.
HDMI: To watch DVD playback via the ITDMI
MONITOR OUT terminal.
When selecting this setting, AV COMPU LINK
remote control system does not work,
3 Press Cursor ►/◄ to make an
adjustment or selection.
Example;
B A L .
-
1
The adjustment is set and the display automatically disappears
a few seconds later.
32