JVC SP-PWC60 - Manual (Page 18)

Operating external components with the remote control See page 14 for button locations.
2
3
4
5
Operating the DBS tuner or
CATV converter
I To setthe manufacturer's code
f Slide the remote control mode selector
toVCR/DBS.
Press DBS.
Press and hold
C!)/l
VCR/DBS.
Keep the button pressed until step 5 is finished.
Press ENTER.
Press number buttons (1-9,0) to enter
the manufacturer's code (2 digits).
Examples:
For a GI Jerrold product: Press 0, then 1.
For a Sony product: Press 2, then 0.
Operating the VCR
Manufacturer Code
EchoStar 21
GI Jerrold 01*, 02, 03,04, 05,06, 07,08
ffamlin 15. 16,17, 18
Pioneer 13. 14
RCA 19
■Scientific Atlanta 09, 10
Sony 20
Zenith 11, 12
* “01” is the initial setting.
6 Release
0/l
VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
■ Operation
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
Before using the remote control to
operate a DBS tuner or CATV converter;
1 Set the remote control mode selector
to VCR/DBS,
2 Press DBS.
1 DBS
VCR/DBS-' J “> ■■■■ 1
To set the manufacturer's code
Slide the remote control mode selector
to VCR/DBS.
Press VCR.
Press and hold C!)/l VCR/DBS.
Keep the button pressed until step ;5 is finished.
Press ENTER.
Press number buttons (1 -9,0) to enter
the manufacturer's code (2 digits).
Examples:
For a Philips VCR: Press 0, then 9.
For an NEC VCR: Press 2, then 5.
2
3
4
5
Manufacturer Code Manufacturer Code
JVC 01*. 02. 03 Philips 09
Emerson 11,26 RCA 05, 06
Fisher 29 Samsung 24
Funai 10, 14, 15. 16 Sanyo 21,22.23
Gold Star 12 Sharp 27. 28
Hitachi 04 Shintorn 30
Mitsubishi 13 Sony 18. 19. 20
NEC 25 Zenith 08
Piuiasonic 07, 17
* “01” is the initial setting.
6 Release
0/1
VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
■ Operation
Aim the remote control at the VCR.
IMPORTANT
Before using the remote control to
operate a VCR;
1 Set the remote control mode selector
to VCR/DBS.
2 Press VCR.
i VCR
VCR/DBS-^
The following buttons are available:
0/1 VCR/DBS: Turns DBS tuner or CATV converter on and
off
CH +/-: Changes the channels.
1-10, 0, s210 (lOO-l): Selects the channel.
The following buttons are available:
0/1 VCR/DBS:
► (play button):
II:
REG
CH +/-:
NOTE
Turns VCR on and off.
Starts playback.
Stops operation.
Pauses playback.
Fast forwards video tape.
Rewinds video tape.
Press this button together with ► (play
button) to start recording or together with
II
to pause recording.
Changes the TV channels on the VCR.
When operating a VCR or DBS tuner/CATV converter;
- The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to
press
VCR or DBS after setting the remote control mode selector.
15