Apple System 7 Pro - Manual (Page 13)

Macintosh or PowerBook installing System 7 Pro:
LaserWriter driver Ye s Installed with system
so ft ware
AppleTalk network software Yes Installed with system
so ft ware
AppleShare workstation software Yes Installed with system
software
Macintosh NOT installing System 7 Pro:
LaserWriter driver
AppleTalk network software
AppleShare workstation software
Apple II computer:
LaserWriter driver
AppleTalk network software
AppleShare workstation software
MS-DOS computer:
LaserWriter driver
AppleShare PC software
AppleShare File Server
so ft ware
AppleShare Print Server
AppleTalk Internet Router
AppleCD SC CD-ROM drive
Group upgrade Q&A
Yes
Maybe
No
No
No
No
No
Maybe
Maybe
Yes
No
Yes
Use printer update Installer
If EtherTalk, need v2.0 or
later
Need v2.0 or later
If server uses system
version 7.1.1 or later,
AppleShare must be v3.0.1
Printing software only
CD-ROM Setup software
This section answers the most commonly asked questions about the group
upgrade to System 7 Pro. The answers here are brief; for details, refer to
the individual topics following this section.
Does System 7 Pro work with all Macintosh models?
System 7 Pro can be installed on all Macintosh and PowerBook computer models
except the Macintosh Plus, Macintosh 512K, Macintosh 128K, and Macintosh XL.
System 7 Pro requires a hard disk and 4 MB of internal random-access memory
CRAM); 5 MB of RAM are recommended.
Do I have to upgrade networked Macintosh and PowerBook computers to System 7
Pro all at once?
No. Macintosh and PowerBook computers using earlier versions of system
software can coexist on your network. However, you need to install new
printing software on all computers that will be sharing LaserWriter printers.
You also need to make sure that all computers have network software that