Kenwood KR-V9020 - Manual (Page 38)

Remote control operation
CD player control keys
CD/VDP
►/II DISC
I I
Mode switch: AUDIO
These keys allow the same operations as the keys with the
same names on the CD player.
The DISC key is for use exclusively with a multiple CD
player. Pressing the DISC key allows one of DISC 1 to
DISC 6 to be selected in the following cycle.
DISC
1
^(6)-
Numeric keys (1 to 0)
Mode switch: AUDIO
When the CD or TUNER input selector key is selected,
these keys can be used in place'of the numeric keys on the
CD player or receiver, respectively.
Mode switch; VIDEO
The numeric keys can be used in place of the TV channel
select keys,
■ TV set control keys
-TV CH-
ТГ
-TV VOL-
Mode switch: AUDIO or VIDEO
TV VOL keys:
Pressing the key increases the volume of the TV set,
and pressing the key decreases it.
TV CH keys:
Pressing the [A] key shifts the channel tuned on the TV set
upward, and pressing the key shifts it downward,
TV/VIDEO key:
Every time this key is pressed, the input to the TV set is
switched between the TV signal and the external video
signal.
TUNER control keys
TUNER
1 1 1 FM 1 1 AM 1
DIRECT H0/IF20 kstAN
Mode switch: AUDIO or VIDEO
These keys allow the same operations as the keys with the
same names on the receiver.
■ Turntable (PHONO) control keys
Mode switch: AUDIO or VIDEO
The Play (◄) and Stop (■) keys are provided,
■ System memory keys
SYSTEM MEMORY
Ml М2 I
Mode switch: AUDIO or VIDEO
These keys allow the same operations as the keys with the
same names on the receiver.
Equalizer key
EQ. key
Mode switch: AUDIO or VIDEO
Every time the EQ key is pressed, the equalizer of this unit
can be switched ON/DEFEAT or ten preset equalizer
patterns can be changed over in the following cycle,
“PGM A- PGM В •PGM E^
DEFEAT
L_
SET E SET SETA-
• When DOLBY PRO LOGIC SURROUND is ON,
patterns will not be selected.