Kenwood KR-V9020 - Manual (Page 17)

AUTO key
Press this key to select the tuning nnode between
AUTO or MANUAL In MANUAL nnode, FM stereo
broadcasts are received in monaural.
MEMORY key
When this key is pressed, the MEMORY indicator
lights and the unit stands by for entry of a preset
station number.
VIDEO DUBBING keys
Press any of these keys when dubbing the video
program sourceregardless of the input source selected
by the input selector key.
AUDIO INJECTION key
Press this key ON when it is necessary to replace the
sound of VCR with that of an AUDIO source during
video dubbing.
Numeric {1 ~ 0/10) keys
Use these keys to:
1) input directly the digits of frequencies, or
2) store and recall fequencies in the preset channels.
DIRECT key
Used to tune to a station directly. Input the desired
frequency with the numeric keys after pressing the DI­
RECT key,
Band selector (AM, FM) keys
Press to select the receiving band.
Preset function (1-10/11-20) key
Used to select the 1-1 0 or 1 1-20 preset channel setting.
In either FM or AM mode, 20 stations can be preset at
random as each setting C'1-10" or "1 1-20") can contain
10 preset stations. Indicator "1-10" lights when the
"1-1 0" setting is used, and indicator "11-20" lights when
the "11-20" setting is used.
PRESET SCAN key
Use this key for preset channel scanning.
When a frequency stored in the preset memory is being
received, pressing this key shifts reception to the next
frequency stored in the preset memory.
System MEMORY key
This key is used to store the current playing condition in
memory.
SYSTEM MEMORY channel keys (M-1/M-2)
Two memory groups can be used with the System Mem­
ory feature.