Kenwood KR-V9020 - Manual (Page 16)

Controls and indicators
TUNING/CHARACTER keys--------------------------- ------ --------
Used to change the frequency. Pressing the UP (17^) side
will advance to a higher frequency and pressing the
DOWN ([y} side will nnove to a lower frequency.
In the station name input mode, this key is used to select
the characters.
DIGIT key
In the station name input mode, pressing this key ad­
vances the column after a character is selected with the
TUNING/CHARACTER UP/DOWN ([AHY]) key. When
this operation is repeated four times the station name
input mode is automatically released.
CHARACTER key
Press this key to activate the station name input mode.
SURROUND keys
Press any of these keys to select the required SURROUND
mode. When the Surround sound is not required, press the
BYPASS key to set to the BYPASS mode,
This key is used to select the CENTER MODE for the
DOLBY PRO-LOGIC SURROUND mode. Each time
this key is pressed, the CENTER MODE changes in
the following order:
^ NORMAL—► WIDE-> PHANTOM-, I
--------- ------- CENTER OFF —---------------- '
CENTER LEVEL keys —--------- ------ -----------------------
These keys are used to adjust the CENTER LEVEL in
the NORMAL or WIDE mode of DOLBY PRO^LOGIC
function. The output level of the center speaker can
be increased or decreased between -F20 dB and
—50 dB around the front speaker level,
DELAY TIME keys ------------ ---------------—------------ ----------
With the SURROUND mode activated, select the required
delay time using these keys.