Kenwood B60-0763-00 - Manual (Page 18)

Listening to broadcasts
Receiving broadcast stations and
storing them in memory (preset
operation)
1
Press the TUNER key.
• Previous reception mode is resumed.
• Pressing the BAND key also set the unit to tuner mode.
TAPE 1 TU NER PHONO
CJ o n n
...
Select the broadcast band.
BAND
FM1 -^FM2 -^AM
rh
CJ CJ n n
.J ClLJLJ.
Every time the BAND key is pressed,
the received frequency band is changed.
3
Select the tuning mode.
AUTO
CrP
p lAUTOl light up.
e Normally, select the auto mode (with AUTO lighted). ^ Press the key to select the auto (AUTO lighted) or manual (not lighted) mode.
4 Tune the desired station.
V TUNING A
To decrease
frequency
To increase
frequency
Auto tuning mode Manual tuning mode
Press once. (Tuning
stops automatically when
a station is received.) Press repeatedly, or press and
hold, until the desired station is
received.
• The TUNED indicator lights up when a station is received,
e Use manual tuning mode when the radio wave is weak and noisy.
At this time, the stereo FM broadcast is received in monaural mode.
5 Store the station in preset memory.
0 Press the MEMORY key.
• Proceed the steps 2 while the MEMORY indicator is lighted.
MEMORY I MEMORYlliqhts up for approx. 5sec.
m VI
(2) Press the numeric key.
DIRECT V TUNING A AUTO
CZI I ^ [=1
1 2 3 4 5
CZi CZ3 CJ CZJ cn
6 7 8 9
nc CJ CD CJ 17^
• Up tolO stations can be preset for each of the FM1, FM2 and AM bands,
e When a station has previously been preset under the numeric key pressed,
the newly preset station replaces the previous station.
0
1 MEMORY Igoes off.n
,r " bbo
LJ
18 KR-V6040 (En)