Operation of remote control unit, Operation procedure, Loading batteries operation procedure – Kenwood B60-0763-00 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of remote control unit
In addition to the remote control of the receiver unit, the provided remote
controi unit can control a KENWOOD cassette tape deck, CD player, turnta
ble, graphic equalizer, etc., connected via the KENWOOD system control
cords.
Double cassette deck
Loading batteries
Operation procedure
Plug the power cord of the system into an AC wall outlet, and
press the | POWER | key on the remote control unit to turn the
power on.
When the power is turned on, press the key of the source com
ponent to be operated.
When two operation keys on the remote control unit are
pressed successively, press each key securely reserving an
interval of more than 1 second for each press.
Be sure to read the instruction manuals of the components
connected via the system control cords.
Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance becomes gradvally shorter, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor,
such a case, change the system installation position to prevent the malfunction.
In
12
KR-V6040 (En)