Kenwood KRC-999II - Manual (Page 5)

Equalizer switch
Press this switch when ad­
justing the graphic equa­
lizer or other equalizer-
related
operation. This
switch can be activated
when the Tape or Tuner
switch is ON.
Tuner switch
This switch IS used to turn
the tuner ON and OFF.
When the Equalizer or Tape
switch is ON, pressing this
switch enables control of
the operations related to the
tuner.
Tape/Eject switch
This switch is ON, and the
indicator lights, when tape
play is engaged. When the
Equalizer or Tuner switch is
ON, pressing this switch
enables control of the opé­
rations related to tape play.
During tape play, when this
switch is pressed, a loaded
tape will be ejected.
Index Scan switch
When this switch is pressed, the
tape is fast-forwarded and the
beginning of each tune (approx.
10 seconds) IS played back from
the next tune one after another.
This operation is continued even
when the tape running direction is
reversed at the end of the current
side. When the desired tune is
heard, press this switch again or
press Play/Program switch to
release this operation.
J
Dolby NR switches
Set this switch to ON when
playing back a tape record­
ed with Dolby NR system
AT c
Dolby B ON M dbi mtl
tt.B LO LO
Dolby C ON
B
MTL
LO LO
Dolby system
m C
off
d^i
LO
MTL
LO
Metal switch
(Tape selector)
Position for Metal, Chrome
or High Bias tapes (CrOz)
(70 EQ)
Position for Norma! tapes
(120 fiS EQ)
dti
LO
MTL
LO
J V
dbx switch
Set this switch to ON when
playing back a tape record­
ed with dbx system.
AT ■ c AT m
M MTL dbx
LO LO mm LO
■MTL
LD
dbx ON dbx OFF
J k.
lEnl