Kenwood KRC-999II - Manual (Page 3)

[TAPE]: Operation and indication when the Tape switch is ON.
[TUNER]: Operation and indication when the Tuner switch is ON.
[EQ]: Operation and indication when the Equalizer switch is ON
[TUNER]: Stereo recep­
tion indicator
Lit when a stereo broadcast
IS received.
Equalizer curve/Spec-
trum analyzer display
Displays the equalizer curve
or the spectrum analyzer.
[TAPE]: Tape remain­
ing indicator
Shows the remaining time
of the tape, in 9-segment
indicators.
[TUNER]: Signal
strength indicator
The left four segments of
the 9-segment indicators
light according to the signal
strength of the receiving
broadcast station.
Attenuator switch
When this switch is set to
ON, the volume indicator
blinks and the volume in­
stantaneously
drops by
— 20 dB When this switch
IS pressed again, the in­
dicator goes off and the
previous volume resumes.
Auto volume switch
When this switch is pressed
ON after the optimum
volume level is set, the
v o l u m e w i l l c h a n g e
automatically according to
noise in the car.
c AT B C
M WT l M dbx MTL
a s LO LO m.B LO LD
V
ON OFF J
Open/Close switch
Press this switch to open the
control drawer Pressing it
again closes the drawer.
With the drawer open,
when the ignition key is tu­
rned
OFF, the control
drawer will be closed auto­
matically.
[TUNER]: Preset station
switches ( 1 — 5 )
One switch can memorize
one of each FM1, FM2,
FM3 and AM.
[EQ]: Equalizer curve
preset switches ( 1 — 5 )
An equalizer turve can be
preset for each switch.
__ J
(En)
3