Kenwood KRC-999II - Manual (Page 4)

Controls and indicators
[TUNER]; Manual/Auto switch
This switch IS used to select the tuning nnode; Auto
1 (seek), Auto 2 (preset seek) or Manual.
5 -
Jl_
^ ATS
TAPE
REMAIN
Auto 1
_ ATI
REMAIN
Auto 2
_ ATI
AT=
TARE
REMAIN
Manual
[EQ]: Equalizer/Analyzer select switch
This switch is used to select the display rnode;
graphic equalizer curve display or spectrum analyzer
display.
[TAPE]: Clock display
Displays the present time in
the 12 hour system
[TUNER]: Frequency/
Clock display
Displays the frequency be­
ing received.
The present time can also
be displayed.
[TAPE]: Tape running
direction indicator
Shows the running status
of the tape.
Audio control A (Up)/
V (Down! switches
Press the Up switch to in­
crease the volume and the
Down switch to decrease it.
The volume changes by one
step
when the control
switch IS tapped once. It
changes continuously, but
slowly when it is kept lightly
pressed, and continuously,
but quickly when the switch
is kept firmly pressed.
[TAPE]: Music search
indicator
Indicates the number of
tunes to be skipped when the
tape IS quickly advanced.
[TUNER]: Preset station
channel indicator
Indicates the channel
number of the preset sta­
tion being received.
A
Balance/Fader indicator
I n d i c a t e s t h e r e s u l t s
Balance
control adjust­
ment, and that of the Fader
control adjustment.
[TAPE]; Tape advance
switch
When this switch is pressed
ON, up to 9 tunes after, or
8 tunes before, the current
tune can be skipped with
the music search operation.
To search for a tune ahead
of the current position,
press
the fast-forward
switch, and to search for a
tune before the current
position, press the rewind
switch. Press the switch
the number of times cor­
responding to the number
of tunes to be skipped.
4
(En)