Uniden UBC 120XLT - Manual (Page 9)

c.
D.
E.
F.
G.
H.
Memory Bank Numbers — Each Memory
Bank consists of 10 channels that you can
select or deselect during scanning operation,
using the numeric keypad. When you select a
Bank, its number appears on the display. When
you deselect a Bank, its number di^pears
from the display. When you press @ to stop
scanning, only the Bank of the current channel
appear^
Low Battery Indicator — Appears on the
display when the Battery Pack is low and needs
recharging.
Frequency Indicator — 7-digits plus decimal
indicate the frequency being received by the
scanner.
Mode Indicators (Only the active mode(s)
are displayed dunng operation.)
SCN
SRCH
PRI
HOLD
DLY
L/0
WX
I
Indicates DATA SKIP activated
during SEARCH.
Indicates SCAN Mode.
Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
tndicates"PRIORITY SCAN Mode.
Indicates SCAN HOLD or SEARCH
HOLD
Indicates DELAY is activated.
In SCAN Mode indicates the channel
shown is “Locked Out”.
In SEARCH Mode indicates the
frequency shown is “Locked Out".
Indicates WEATHER SCAN Mode.
irC Indicates the keypad is locked.
Priority Channel Indicator — P appears
when the scanner stops on a Priority Channel.
2. Press @ to start scanning all programmed channels
that are not locked out. (SCAN moves across the display
during scanning.)
3. In SCAN Mode, press to stop scanning. (HOLD
appears on the display.) After you stop the scanner,
press @ again to resume scanning.