Deleting a stored frequency – Uniden UBC 120XLT User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6.
Press (
e
) to store the entry. The channel number on
the display stops blinking.
9.
(BANK“
18 1ES2500
AIR
HOLD
7.
If that frequency is already stored in another channel,
you will hear a "beep", and the other channel number
will appear on the display.
If you want to store the frequency in the selected
channel (18) as well, press (?) again. Or, press (£)
twice and enter another frequency for the currently
selected channel. The channel number on the display
stops blinking.
Note: Any frequency already stored in any channel
will automatically be replaced by the new one.
8.
If you try to enter a frequency that is outside of the 9
Bands, you will hear a "beep”, and the word "Error"
appears on the display.
Press (J) twice and re-enter the correct frequency.
To program another channel, repeat the above
procedures.
Deleting a Stored Frequency
To delete a frequency from a channel:
1
.
2
.
3
.
Display the channel and frequency to be deleted.
Press (T) on the numeric keypad.
15
I
Press (^. The current channel is erased, and the
display shows 000.000.
Note: That channel wilt be skipped during scanning.