Kenwood TS-430S - Manual (Page 25)

SECTIONS. OPTIONAL ACCESSORIES
1
..J
The following optional accessories are available for use
with the TS-430S.
■ SP-430 EXTERNAL SPEAKER
The SP-430 is an external speaker designed exclusively
for use with the TS-430S. It matches the transceiver in
design and tone quality.
■ SP-40: MOBILE SPEAKER
■ PS-430 REGULATED DC POWER SUPPLY
The PS-430 is a regulated DC power supply with high cur­
rent capability. The output is 13.8 VDC/20A (intermit­
tent). Since terminals for 13.8 VDC/lOA are also provid­
ed, in addition to an output power cable for use with the
TS-430S, the PS-430 can also be used as the power
source for another low power mobile transceiver such as
a 2-meter rig.
■ FM-430: FMUNIT
■ AT-250
■ HF LINEAR AMPLIFIER TL-922/TL-922A
The TL-922/TL-922A is an HF linear amplifier operating at
maximum legal power, and employing a pair of 3-500Z
high performance transmitting tubes. The TL-922A (with­
out 10m band) is available only in U.S.A.
■ HS-4: HEADPHONES
■ HS-5 COMMUNICATIONS HEADPHONES
Headphones designed for communications equipment.
These light-weight open air-type headphones remain com­
fortable during extended operation. Easily attached ear-
pads are provided.
■ HS-6 COMMUNICATIONS HEADPHONES
Deluxe, very lightweight headphones designed for com­
munications equipment.
■ HS-7: COMMUNICATIONS HEADPHONES
■ MC-60A BASE STATION MICROPHONE
Communications microphone with push-to-talk and re­
mote frequency UP/DOWN switches.
■ HC-10: DIGITAL WORLD CLOCK
The HC-10 is a highly advanced world clock with dual dis­
plays which can memorize 10 preset world major cities
and 2 additional programmable regions.
■ MB-430 MOBILE MOUNT
Mobile mount designed for the TS-430S. It allows easy
installation and removal the transceiver.
The MB-430 can either be suspended from the dashboard
or attached to the transmission tunnel or a center con­
sole. The transceiver tilt angle can be adjusted 5 steps.
■ MC-42S: MICROPHONE (8 pin plug)
SP-430 PS-430
AT-250
HS-5
HS-6 MC-60A
HC-10 MB-430
25