Displaying bank memory status, Bank e p**_*__*l – Uniden UBC9000XLT User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Displaying Bank Memory Status
This feature shows the programming status of the channels in a bank.
Use these keys:
© ©
Status, Scan, and Numeric Keys,
and Rotary Tuning Controls
1. Press I .
2. Enter the channel number or
use the Rotary Tuner to select
any channel in the bank.
Bank E ch 110
854.9800MHz
3. Press and hold (cowr |for two
seconds.
Bank E p**_*__*L
LL*
The display shows:
The bank {A through J or 0 through 9)
An asterisk character (^) to represent each programmed
channel.
An underscore {_) character for an unprogrammed channel
A
“P”
to designate a Priority channel
A "L” to show a channel that is locked out.
To check bank memory status in other banks, turn the Rotary Tuner to
move from one bank to the next.
To exit from this mode, press
or (
|.
40