Uniden UBC9000XLT - Manual (Page 14)

Programming Channels
Before you can scan, you must program the channels within a bank. You
can store one frequency per channel, up to 500 channels. These are the
banks and their associated channels:
Bank Channel Number Bank Channel Number
A 1 -25 1 251 - 275
В 26 -50 2 276 - 300
c
51 -75 3 301 - 325
D 76-100 4 326 - 350
E 101 -125 5 351 - 375
F 126 -150 6 376 - 400
G 151 -175 7 401 - 425
H 176-200 8 426 - 450
I 201 - 225 9 451 - 475
J 226 - 250 0 476 - 500
I
Auto Sort
Each time you store a frequency, the list of scanning frequencies in the
bank is automatically sorted by frequency number. This unique Auto Sort
feature enables faster scanning. When you manually step through a
bank, however, frequencies are sorted according to channel number.
Choosing a Programming Method
With the UBC9000XLT, there are five ways to program a channel:
Manually selecting a channel and frequency, using the numeric
keypad
Using the Rotary Tuner to select a channel and frequency
Searching a band to find active frequencies, and then storing them
into channels
Using the Auto Store feature to automatically program channels
Transfer a programmed frequency from another channel
11