Bank -abcdefchij '1234567890, Store, Bank zabcdefghlj – Uniden UBC9000XLT User Manual
Page 21: Store end
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Press [ ALFTO ] to enter the Auto
Store Mode.
6. Select the bank{s) for
programming. The selected
bank indicator{s) stop blinking.
Example:
Press fen and
Bank -ABCDEFCHIJ
'1234567890:
\ I /
Bank zABCDEFGHlj:
7. Press [ SRC I to begin the Auto
Store.
The LED on the I
1
key
flashes.
Note:
You hear no audio during Auto Store.
Note:
If the bank you chose is already fully programmed, a double
beep sounds. Choose another bank.
Searching frequencies
Storing an active frequency.
Search resumes.
To stop Auto Store, press [^^),
(
scam
|, [
alto
| ,or
You can change these functions during Auto Store:
Frequency Step (See page 35.)
Turbo Search (See page 31.)
Signal Mode (See page 36.)
8. The unit tells you when Auto
Store is complete.
Store
end
-V+
18