Uniden UBC9000XLT - Manual (Page 20)

Programming With AUTO STORE
This procedure searches a frequency range and automatically stores
active frequencies into empty channels of the selected bank(s).
Note: Be sure to set SQUELCH before you begin a search. See “Setting
the Squelch” on page 8.
Use these keys:
r
...................................... -------------- -rr-------------------------------
liilillpfl iifi'inon T
y
iff.'.
_____ _______________ ,-K a,
JT
){S
1 fS t
^
—
—
---------------------------------------------------------- ~—
------------------------------------ 1
Programming, Search, Scan, Mode, Numeric, and Bank Keys
and Rotary Tuning Controls
1. Select a frequency range.
See page 53,
Example: 810.000 MHz to 856.000 MHz
2, Press
3. Enter the frequency and press
VuMn^to enter the lower limit
of the search range.
Example: 810.000 MHz
4. Enter the frequency and press
\uMrry to enter the upper limit
of the search range.
Example: 856.000 MHz
NFM
NFM
456.0000MHz
810.0000MHz
NFM
NFM
810.0000MHZ
856.0000MHz
I
17