Programming with search – Uniden UBC9000XLT User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Select a Irequency.
Example: 123.7750
4. Enter the Frequency.
Then press[
e
|.
Bank C ch 52
123.7750MHz
12.5KHZ ch^'
AM 123.7875MH^
5. To turn to a new frequency, select
FREQ
with the Rotary Tuner
Mode Selector then turn right to
step up, left to step down.
Example: 123.7875 (turn right)
Note;
The channel indicator flashes on the display, indicating that the
frequency displayed is not programmed in that channel.
6. Press |
e
~~1 to program the
channel.
Bank C ch 52
123.7875MHz
To program more channels with the Rotary Tuner, repeat steps 2-6.
Programming with Search
The Search feature lets you search for active frequencies in a range you
choose and store any or all of those frequencies into channels.
For more information about searching, see “The Search Mode," page 29.
Use these keys:
Search, Scan, Numeric, and Bank Keys,
and Rotary Tuning Controls
Note;
Be sure to set SQUELCH before you begin a search. See
“Setting the Squelch," page 8.
14