Bank a p ch out of band, Programming with the rotary tuner, Scan, numeric keys, and rotary tuning controls – Uniden UBC9000XLT User Manual
Page 16: Bank a, Duplicate ch 230, Bank b ch 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If an error is made during
programming, or if the frequency is out
of range, this screen appears. Enter a
valid channel or frequency number.
Bank A P ch
OUT OF BAND
If the frequency is stored in another
channel, the display will indicate the
original channel for that frequency.
Bank A
Ch
^
DUPLICATE
CH 230
To program more channels, repeat steps 3 and 4.
Press
j
to store the same frequency into the selected channel.
Or, select another channel.
Or, press I cm I twice to clear.
Programming With the Rotary Tuner
Use these controls:
tA
MB
imio
HE
1
CF lia irrnmrj )
% ««
Scan, Numeric Keys, and Rotary Tuning Controls
1. Press I MANHALjto enter the
Manual Mode.
OR
Turn the Rotary Tuner.
Bank B ch 49
I / O
OOO.OOOOMHz
Note:
Make sure the
LOCK
LED is out.
2. Select
CHAN
with the Rotary Tuner
Mode Selector, then turn knob.
Example: channel 52
Turn right to step up through
channels, left to step down
through channels.
Bank C ch 52
lyo OOO.OOOOMHz
I
13