Genie Excelerator User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(Continued)
Operating 2 or 3 Door Openers:
•
To move one of the doors.
•
Enter your PIN.
•
Press
,
Press door opener number (C
1
J or
or
Mount Keypad. (Mounting screws located inside
battery compartment.)
•
Remove Battery Cover. See Figure
3.
•
Drill a 1/16" pilot hole for the top mounting screw.
•
Install a screw into the drilled hole,
leaving a 1/8" gap between the
screw head and the wall.
See Figure
2.
•
Hook the Keypad over the screw.
•
Mark,drill pilot hole and fasten
bottom screw.
•
Reinstall Battery Cover.
A
Enter your PIN
• Press
B
Enter theTemporary PIN (from 3 to 8 characters).
• Press
.
DO NOT reprogram the Door Opener(s).
Temporary PIN remains active until the next time your
normal PIN is entered.
Erase old PIN:
Press and hold in order
- Red LED will blink once and turn off.
•
Release all buttons.
Programming Door Opener(s).
•
Return to "Programming for 1 Door Opener"or
"Programming for 2 or 3 Door Openers."
24
FcM' Help, call l-SOOHJSHSEiiE or visit