Culligan Drinking Water System - Manual (Page 4)

System
Specifications
System Flow Sequences . . . . . . . . . . . . . . . . . .Sediment Filter, Activated Carbon Filter, Reverse
Osmosis Membrane, Storage Tank, Polishing Filter,
Dispensing Faucet.
Sediment Filter . . . . . . . . . . . . . . . . . . . . . . . . .Spun Polypropylene Type
Carbon Filter . . . . . . . . . . . . . . . . . . . . . . . . . .Activated Carbon Block
Reverse Osmosis Membrane . . . . . . . . . . . . . . .Thin Film Composite Type
Product Production Rate without
Storage Tank to Atmosphere 2 . . . . . . . . . . . . . .35 gpd
Ratio of Product to Flush Flow 3
Soft Water Applications . . . . . . . . . . . . . . . .1:1
Hard Water Applications . . . . . . . . . . . . . . .1:3 - 1:5
Polishing Filter . . . . . . . . . . . . . . . . . . . . . . . . .Activated Carbon Block
Dispensing Faucet . . . . . . . . . . . . . . . . . . . . . .Culligan ® Smartap ® Rotary Operation, Stainless
Steel and Resin Flow Passages, with Built-in Siphon
Break and Quality Monitor
Color Options . . . . . . . . . . . . . . . . . . . . . . .Polished Chrome, Satin Chrome, White, Black,
Black/Chrome, Almond
Storage Capacity . . . . . . . . . . . . . . . . . . . . . . .3 gallons (max.)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4 gallons (nom.)
Dimensions
Filter Assembly . . . . . . . . . . . . . . . . . . . . .15.5”W x 6”D x 15”H
Storage Tank . . . . . . . . . . . . . . . . . . . . . . .11” Diameter x 15.5”H
* DPR - Daily Production Rate
1 Rating at 50 psi, 77°F, 500 mg/L TDS influent.
2 This is a factory specification for membrane production. Actual production rate and TDS reduction
will depend on temperature, water pressure, TDS level, membrane variation and usage pattern.
3 May vary with pressure. See Technical Manual for all hard water applications and applications
where TDS exceeds 1000 mg/L (ppm).
4 Efficiency rating means the percentage of the influent water system that is available to the user
as reverse osmosis treated water under operating conditions that approximate typical daily usage.
5 Recovery rating means the percentage of the influent water to the membrane portion of the sys-
tem that is available to the user as reverse osmosis treated water when the system is operated
without a storage tank or when the storage tank is bypassed.
4
3 Gallon
System DPR* to Storage Tank 1 11.0 (41.6 L)
Efficiency Rating 4 20%
Recovery Rating 5 43%