Culligan Drinking Water System - Manual (Page 15)

30. Open product water faucet. Let water flow until all air has been expelled from the system.
31. Close product water faucet. Wait 30 minutes, check connections for leaks, and correct if neces-
sary.
Icemaker/Extra point of use: Check lines for leaks.
32. Allow storage tank to fill overnight.
DO NOT USE FIRST FULL STORAGE TANK OF WATER
33. Discard (to drain) first full tank of water by opening product water faucet until water
flow stops, then close faucet. This flushes sanitizing solution from system.
Icemaker: Let tray/bin fill with ice cubes. Discard all ice cubes to drain. This flushes sanitizing
solution from lines in icemaker. Replace delivery device filter (if applicable).
Note: System is ready to use. Should there be any aftertaste or odor, drain storage tank and
repeat Steps 32 and 33.
15