Compatible Systems 5.4 - Manual (Page 235)

Chapter 14 - General 229
Advanced SNMP Configuration Dialog Box
Advanced SNMP Configuration Dialog Box
To access this dialog box, select Global/System Configuration from the
Device View, and then select the ADVANCED button.
This dialog box displays Community Strings and Traps, but is not used to add
or modify the entries.
To add or modify entries, you must access the Community Strings and/or
Traps Dialog Boxes by selecting the Add... or Modify... buttons in the
Advanced SNMP Configuration Dialog Box.
> SNMP Enabled
This checkbox controls whether Advanced SNMP management of the device
can be done.
> Sets Enabled
This checkbox controls whether SNMP Sets can be done to the device.
> Traps Enabled
This setting controls whether SNMP Traps will be done by the device when
trap conditions are encountered.