Installation requirements, Portable installation (model 110.4472), Tools needed – Kenmore 110.4472 User Manual
Page 5: Alternate parts
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/666278/5/background.png)
INSTALLATION REQUIREMENTS
Parts supplied:
Assemble the necessary tools and supplies before beginning the
washer installation. The parts supplied are in the washer basket.
Portable Installation (model 110.4472)
Tools needed:
■ Pliers that open to
Wie"
(3.95 cm)
■ Utility knife
■ Flashlight (optional)
Parts supplied:
A
A. Flat washers for faucet adapter and fill hose
B. Silver, double-wire hose clamp (for the bottom of the
drain hose)
C. Faucet adapter
D. Flll-and-drain hose
NOTE:
To change a permanent installation to a portable
installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call
1-800-4-MY-HOME® (1-800-469-4663).
Ask for Part Number
3935674.
Permanent Installation (model 110.4418)
Tools needed:
■ Pliers that open to l^/is" (3.95 cm)
■ Flashlight (optional)
■ Adjustable or open end wrench
®/is"
(14 mm)
■ Level
■ Wood block
■ Utility knife
■ Measuring tape
A. Drain hose
B. Silver, double-wire hose clamp
(for the bottom of the drain hose)
C. Yellow, single-wire hose clamp
(for the top of the drain hose)
D. Water inlet hoses (2)
E. Flat water inlet hose
washers (4)
F. Beaded tie strap
NOTE:
To change a portable installation to a permanent
installation, a kit is required. To order, call your local Sears store
or Sears Service Center. For further information, please call
1-800-4-MY-HOME® (1-800-469-4663).
Ask for Part Number
4396746.
Alternate Parts
Your installation may require additional parts. For ordering
information, call your local Sears store or Sears Service Center.
For further information, please call
1-800-4-MY-HOME®
(1-800-469-4663).
If You Have:
You Will Need to Buy:
Laundry tub or
standpipe taller
than 72" (183 cm)
Sump pump system (if not already
available)
1" (2.5 cm)
diameter
standpipe
2" (5 cm) diameter to 1" (2.5 cm)
diameter standpipe adapter, Part No.
3363920
Overhead sewer
Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain
Siphon break, Part Number 285320;
additional drain hose, Part Number
3357090 and connector kit,
Part Number 285442
Water faucets
beyond reach of
fill hoses
2 longer water fill hoses:
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
Drain hose too
short
Drain hose. Part No. 388423 and hose
kit, Part No. 285442
Drain hose that is
too long
Hose kit. Part No. 285442
Lint clogged drain
Drain protector, Part No. 367031