Zipper applicatiow, Regular zipper, Invisible zipper – Kenmore 1232 User Manual
Page 30: Cording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
lii
ZIPPER APPLICATIOW
SETTINGS
Stretch Stitch Control,
Stitch Width Control .....
Stitch Length Control.....
Zipper Foot
.Horizontal
0
12
REGULAR ZIPPER
Pin or baste zipper to fabric and place
the work in position under the presser
foot. Loosen the zipper foot adjusting
screw to set the foot on the left side of
the needle, and sew the left side zipper
as shown. (Fig, 1i To sew the right'
side zipper, loosen the screw and bring
the foot to the right side of the needle.
INVISIBLE ZIPPER
Adjust the foot so the needle is sewing
through
the
center
hole
of
the
foot
and one groove of the foot is riding on
the teeth of the zipper, See Fig, 2. Fol
low
the
zipper
manufacturer's
instruc
tions.
After zipper has been inserted, finish
sewing seam by shifting foot to side
position sewing through side notch,
CORDING
Foot can also be used to make cording
for slipcovers etc. Cover a cord with a
strip of bias fabric and sew as shown in
Fig. 3.
NOTE:
Use "Low Bar Sewing Machine ZIP
PER
FOOT"
(6757)
for
"invisible
zipper"
and
"cording",
which
will
be
obtained at any stores of Sears Roe
buck
and
Co,,
and
Simpsons-Sears
Limited