Iisaii, T:3|ss!»3e, Imimsmmsss – Kenmore 1232 User Manual
Page 22: Press efi feet
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
t:3|ss!»3E
iiSaii
imiMSmMSSS
PRESS EFi FEET
To
change
the
various
presser
feet,
raise the presser bar to its highest posi
tion by lifting the presser foot lever,
Loosen the presser foot thumb screw,
choose
the
proper
foot,
insert
from
the
bottom
Tighten
the
screw
using
the large screw driver to make certain
the foot is secure
You have been given a variety of presser feet:
A. Zigzag Foot
B. Satin Stitch Foot
C. Zipper Foot
NOTE:
Additional feet and attachments are available at most large retail stores or
through the catalog. Please select attachments for left needle position with
low bar.