Kenmore 1232 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig, 1
Place thread on spool pin as shown
with thread coming from the back of
the
spool.
Draw
thread
through
the
top thread guides.
Holding the spool
stationary
with
right
hand,
pull
the
end of the thread between the tension
discs as shown,. Pull the spring wire
loop up and past the top hook until
the
thread
can
be
slipped
into
the
hook (See Fig,. 2), When the thread is
released, the spring wire loop will re
turn
to
position
(See
Fig.
3)
with
thread in proper place. Release spool
of
thread
and
continue
to
thread
machine
exactly
as
shown.
Needle
must always be threaded in direction
as shown in Fig. 4,
Hold needle thread loosely in left hand
and rotate hand wheel toward you one
complete turn. Bring bobbin thread up
by pulling upper thread, (Fig, 5)