Caring for your fax-150 – Brother FAX-150 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARING FOR YOUR FAX-150
Optimum print quality can be maintained if the scanning and printing area are cleaned after using
three or four rolls of recording paper. The procedure is explained below:
I. CLEANING THE PRINTING AREA
•
Remove the recording paper roll from the unit.
•
Using an applicator or a soft cloth soaked in alcohol, gently remove any dirt from the
printing head. Do not use organic solvents, such as benzene or thinner.
•
Use a dry cloth to gently wipe off any dirt from the rubber roller and the recording
paper holder.
II.
CLEANING THE SCANNING AREA
•
Using an applicator or a soft cloth soaked in alcohol, gently remove any dirt from the
scanner and the document pressure bar. Do not use organic solvents, such as benzene
or thinner.
23
III. CLEANING THE BODY OF THE UNIT
•
Use a dry cloth to gently wipe off any dirt from the body of the unit. Remove visible
dirt and dust.
•
Do not use water, alcohol, thinner or any other organic solvent.