Tuner section operation, Amplifier section operation – Pioneer VSX-452 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOTE CONTROL OPERATION

RECEIVER TUNER AND AMPLIFIER SECTION OPERATION

[TUNER SECTION OPERATION]

Set the AUDIO/VIDEO switch to AUDIO.

0 MPX button

Switches between MONO/AUTO STEREO during FM reception.

0 SCAN button

Use this to start memory scan of stations.

@ STATION (Down) button
This takes you to lower station numbers in sequence.

[AMPLIFIER SECTION OPERATION]

® FUNCTION button

Press to select the receiver input.

0 SIMULATED STEREO button

Switches simulated stereo mode ON/OFF.

0 3CH LOGIC button

Switches DOLBY 3CH LOGIC ON/OFF.

0 SURR. (Surround) MODE button
The surround mode is switched in the following manner each time the

button is pressed:

------------- ► DOLBY PRO LOGIC SURROUND--------------

■OFF ^STUDIO —SIMULATED SURROUND

® CENTER MODE/TEST TONE button

• AUDIO/VIDEO switch ... AUDIO position

Functions as a CENTER MODE button, enabling selection of the
DOLBY PRO LOGIC SURROUND and DOLBY 3CH LOGIC center mode.

• AUDIO/VIDEO switch ... VIDEO position

Functions as a TEST TONE button for switching the test tone ON/OFF.

® RECEIVER POWER button

Switches the receiver power ON/STANDBY.

@ RETURN button

Press to return the receiver to it's initial state. (Refer to page 13.)

(§) MUTING button

Press to temporarily reduce sound. Press again to return to the

original volume level.

® MASTER VOLUME ( + , -) buttons

Use to adjust the overall volume level.

-, -) buttons

• AUDIO/VIDEO switch ... AUDIO position

Function as CENTER LEVEL adjustment buttons

• AUDIO/VIDEO switch ... VIDEO position

Function as REAR LEVEL adjustment buttons

® SLEEP/DELAY TIME button

• AUDIO/VIDEO switch ... AUDIO position

Functions as a SLEEP button
Activates the SLEEP timer. The length changes in the following

manner each time the button is pressed:

BO — 30 — off

LD-

CD — VCR -

-TUNER — PHONO

Unit: minutes

When SLEEP is ON, the display section is about half as bright as when

SLEEP is OFF.

• AUDIO/VIDEO switch ... VIDEO position

Functions as a DELAY TIME button. You can change rear speaker

delay time during DOLBY PRO LOGIC SURROUND or SIMULATED
SURROUND operation.

® TAPE 2 MONITOR button

Switches TAPE 2 MONITOR ON/OFF.