Character/level display, Auto tuning indicator, Tuning indicator – Pioneer VSX-452 User Manual
Page 14: Muting indicator, Tape 2 indicator, Memory indicator, Scan indicator, Search indicator, Station/delay time/level/sleep time display, Fm auto stereo reception and monaural reception
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FRONT PANEL FAClLHIhS
DISPLAY SECTION
CENTER
LEVELS
REAR
AM
MIN
FM
&3
>10 >10
>10
i/ni
(o\i
fm(
(D ®
kHz
AUTO.
TUIMIIMQ
MAX
MOIMO~
TUNED
MHz
STEREO
»MUTINO
TAPE S
^MEMORY
I
^8CAN
SEARCH
SIMULATED
® ® ® ®
3CH
LOGIC
STATION
DELAY
TIME
T
Du
*
LIU
ch
dB
min
®
® CHARACTER/LEVEL display
• Displays function, frequency and "SLEEP".
• It also displays the level settings during adjustment. During level
display, MIN and MAX light.
® AUTO TUNING indicator
Lights up when In the auto tuning mode.
©Tuning indicator
TUNED: Lights up when a station is tuned in during TUNER operation.
MONO:
Lights up when the FM MONO mode is selected with the
MPX MODE button.
STEREO: Lights up when a stereo FM broadcast is being received.
® MUTING indicator
Flashes when MUTING in ON.
® TAPE 2 indicator
Lights up when the input selector is set to TAPE 2 MONITOR ON.
® MEMORY indicator
When presetting stations, this lights when the MEMORY button is
pressed.
® SCAN indicator
Lights up during memory scan operation.
® SEARCH indicator
Lights during Return mode operation.
® SIMULATED STEREO indicator
(J) DOLBY 3CH LOGIC indicator
® STATION/DELAY TIME/LEVEL/SLEEP TIME display
• Indicates the channel (ch) selected with the STATION CALL buttons.
• Indicates delay time (ms) when using SIMULATED SURROUND or
DOLBY PRO LOGIC SURROUND.
• Indicates rear level and center level (dB).
• Indicates sleep timer settings (min).
Press the POWER switch to the ON position.
Select TUNER with the input selector.
Be sure to turn the TAPE 2 MONITOR button OFF when listening
to AM or FM broadcasts.
Switch ON the SPEAKERS button corresponding to the speakers
being used.
FM auto stereo reception and monaural reception
Each time you press the MPX MODE button, the MONO indicator
in the display section lights or goes out.
• If an FM stereo broadcast is received when the MONO indicator
is out, the STEREO indicator lights, and sound is in stereo.
• If an FM stereo broadcast is received when the MONO indicator
is lit, the sound will be monaural.
If there is interference during STEREO mode reception, switch to
MONO. The sound will become monaural but interference will be
reduced.
14