Connecting an external tad to the unit – Brother Fax 980 M User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
........
IIIM
Connecting an External TAD to the Unit
You may connect an external TAD to your fax machine, as shown helow. Use the “EXT.” jack on
your fax machine.
Helpful Hints
When You Use TAD Mode
1. You can inform callers beforehand that if they call manually and get your
telephone answering device when they want to send a fax, all they have to do
is press your remote code to activate (>^51 unless you have changed it) your fax
machine.
2. Another alternative is to record a TAD message that says, for example, “This
answering machine is connected to a fax unit. If you may leave a voice message,
please speak after beep. If you may send a fax message, please press (your
remote activation code) after beep. Thank you.”
3. You need to erase the incoming messages on your external telephone answer
ing device when it’s full, or TAD mode will not answer any calls, faxes or
otherwise.
7-7