Secure side shelf assembly to the firebox assembly – Kenmore LIQUID PROPANE GAS (LPG) GRILL 119.1623 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Secure Side Shelf Assembly to the Firebox Assembly
□ Use 1 Phillips Head Bolt and 1 Washer from inside of firebox to secure attached Side Shelf
Assembly.
In
Phillips Head Bolt: M6x3/8"
Qty: 1
Part # SB0004
Washer: M6
Qty: 1
Part # SB0005
Place Heat Diffusers, Cooking Grates, and Warming Rack into the Firebox Assembly
n Place the Heat Diffusers (F) into the Firebox Assembly (I), Ensure the fronts of the Heat
Diffusers, maked "FRONT", are at the front of the firebox.
□
Place the Grates (E) into the Firebox Assembly (I). Each grate has a small knob on each
corner. The knobs should rest on the front or back panels of the firebox. The 2 large
and 1 small grates can be inserted in any order.
□
Place the Warming Rack (D) into the slots along the top of the Firebox Assembly (I) as
shown.
19