Kenmore LIQUID PROPANE GAS (LPG) GRILL 119.1623 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Secure Side Burner Assembly to the Firebox Assembly
□ Use 1 Phillips Head Bolt and 1 Washer from inside of the firebox to secure attached Side
Burner Assembly as shown.
|lll
Phillips Head Bolt: M6x3/S''
Qty: 1
Part # SB0004
Washer: M6
Qty: 1
Part # SB0005
Secure Side Burner Valve and Control Knob to Side Burner Control Panel
□ Insert the side burner valve stem up through the hole in the Side Burner Control Panel
(M). See Inset 1.
Insert side burner valve stem into the side burner tube. See Inset 2.
Secure the side burner valve to the Side Burner Control Panel (M) using 2 white Philips
Head Bolts. Ensure the side burner valve stem is centered in the stem tube of the side
burner.
If not, center it, which may involve loosening the 2 Phillips Head Bolts. See Inset 3.
Push the Control Knob onto the valve stem. See Inset 3.
□
□
□
Inset 2
Phillips Head Bolt: M4x5/16"
(White)
Qty: 2
Part # SB0009D
Control Knob
Qty:l
Part # FE0015